Grab Hire Kingston

Grab Hire Kingston | Ashville Aggregates

Grab Hire Kingston | Ashville Aggregates

Ashville Aggregates provide grab hire Kingston, West London, NW London and surrounding M25 Areas with our fleet of 8-wheel, 32 tonne grab load lorries. Grab lorries can carry roughly 15 tonnes and can reach 6 meters. Grab Hire is ideal for site excavations, site clearance, garden clearance, and waste disposal and is by far the most cost effective solution.

Our Grab lorries are versatile and can access most sites both domestic and commercial. The 6-meter reach of the crane means we can load from the ground, over a wall or fence if need be, saving many hours in manpower having to wheelbarrow material to the and from of a site.  The height of a Grab Hire lorry is 3.8 meters, without the crane in use. The width of the lorry for a comfortable fit is 3 meters. The turn around time from site arrival is usually 20 minutes for muck and 30 minutes for concrete, stone or brick.

Our employees here at Ashville Aggregates appreciate the importance of always providing our clients with a highly reliable service from the moment you make the initial contact with us until you’ve received your service. Our pledge is to always do as we say we will.

We are incredibly committed to the environment here at Ashville Aggregates and take all the required precautions to ensure our carbon footprint remains low. 90% of the materials we use are recycled and thanks to sourcing our materials so responsibly we can keep both our prices and our carbon footprint as low as possible.

Health and safety is something that we take incredibly seriously here at Ashville with all of our staff undertaking academic as well as practical safety training. We also audit our sites regularly internally as well as with external third parties.

Alongside Grab Hire we offer our clients:

Ordinarily, we can provide Grab Hire Kingston service on a next day basis. We can charge per load or day and operate seven days per week. Night work is also available for utility companies and local authorities. We take great pride in our fleet of lorries, and all are maintained and cleaned regularly. Our state of the art tracking system means we can monitor, adapt and communicate with our staff regularly, ensuring we can remain efficient and responsive.

While providing Grab Hire services, we can also provide aggregates supply. Our lorry can arrive with a primary or secondary aggregate of your choice, offload to one section of the site and then load the waste material before leaving. This is perfect for both large and small construction sites as sub-bases can be created immediately after excavation.

As registered carriers of waste with the Environmental Agency, we collect waste materials and dispose of them in compliance with current regulation at fully licensed recycling centres. Our Grab Hire operators are fully licensed, trained, experienced and insured.

Within our fleet, we have a 4×2 grab lorry which is affectionately known as the “baby grab”. This lorry is perfect for sites with limited access, narrow streets and height restrictions. This mini grab can also be used to supply up to 9 tonnes of primary or secondary aggregates. To show our dedication to continued improvement, we applied and secured FORS Gold Standard (upgrading from Silver) in 2016. We are very proud of this and continue to strive for improvement in all areas.

For more information or to book a Grab Hire service, please call us on 020 7736 0355.

Grab Hire Kingston can remove:

  • Earth & Soil
  • Brick & Concrete
  • Recyclable materials (for instance, hard-core)
  • General building rubbish
  • Mixed waste
  • Clean inert
  • Muck (also known as clay)
  • Delivery of Aggregates & Materials

Visit our dedicated site here.

AREAS WE COVER