Tipper Hire Marylebone
Reliable and Professional Tipper Hire Marylebone Service
At Ashville Aggregates we provide Tipper Hire services with our fleet of modern 8-wheel, 32 tonne Tipper lorries. Tipper Hire lorries can carry roughly 20 tonnes per load. Tipper Hire is ideal for Aggregates and materials delivery, movement and removal. Our Tipper Hire lorries can access most sites. The height of a Tipper Hire truck is 3.8 meters, and 3 meters of width is needed for comfortable access.
Ordinarily, we can provide Tipper Hire and Aggregates supply services on a next day basis. We can charge per load or day and operate seven days per week. Night work is also available for utility companies and local authorities. We take great pride in our fleet of lorries, and all are maintained and cleaned regularly. Our state of the art tracking system means we can monitor, adapt and communicate with our staff regularly, ensuring we can remain efficient and responsive.
We often provide Tipper Hire and aggregates supply simultaneously. Our lorry can arrive with a primary or secondary aggregate of your choice, offload to one section of the site and then be loaded with the waste material before leaving. This option is perfect for both large and small construction sites as sub-bases can be created immediately after excavation.
For smaller sites with limited access, we offer tipper vans for wait and load rubbish removal or a Mini Grab Service. The wait and load vehicle when full will remove the waste of a 12-yard skip. We park outside as closely as possible and allow up to 30 minutes to load, taking all waste types such as plasterboard, timber, flooring etc. We then recycle 90% of all waste collect at the transfer station.
Practical and academic safety training is something we take very seriously and ensure all of our employees undertakes this training. We make sure that all of our sites are regularly audited and we invite third parties to do the same to back up our own testing.
Alongside Tipper Hire Marylebone we supply:
Our commitment to the environment is second to none here at Ashville and we ensure our carbon footprint remains as low as possible. Every one of our materials that we use is sourced in highly environmentally friendly manners and our recycling rate is around 90%. This not only keeps our prices low but our carbon footprint as well. As registered carriers of waste with the Environmental Agency, we collect waste materials and dispose of them in compliance with current regulation at fully licensed recycling centers. Our Tipper operators are fully licensed, trained, experienced and insured.
Ashville Aggregates staff are incredibly dedicated to providing the most responsive and reliable service possible no matter the size of the job or the location of the project as long as it is in the area we cover. Communication will be continual from the moment you make your first contact until your job is complete. We always pledge to provide the service we say we will.
Tipper Hire can remove & deliver:
- Type1 MOT
- Sand (sharp & building)
- Shingle (10mm & 20mm)
- Crushed concrete
- Clean inert
- Muck (also known as clay)
To show our dedication to continued improvement, we applied and secured FORS Gold Standard (upgrading from Silver) in 2016. We are very proud of this and continue to strive for improvement in all areas. For more information or to book a Tipper Hire Marylebone service, please call us on 020 7736 0355.
Areas We Cover
Kingston upon Thames